Dear new registered users!

All messages from new registered users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.

Side Assist retrofit

Discussions of VDOEditor utility and everything regarding VDO clusters
Post Reply
rrador
Posts: 10
Joined: 28 Sep 2023 04:55

Side Assist retrofit

Post by rrador » 27 Dec 2024 21:33

Hi everyone

I have 2015 passat TDI NMS (usa version).
Retrofitted side assist sensors and mirrors from 2018 NMS passat. I am trying to get side assist menu in the cluster but no luck.

My cluster is 561920970G, HW 05, SW 813.

I used VDO editor to enable side assist menu in the eeprom but it still doesn't show.

Does my SW version not support this?
Top
Daku
Posts: 92
Joined: 23 Feb 2018 20:42

Re: Side Assist retrofit

Post by Daku » 30 Dec 2024 19:33

0x454 = BIT 0 - enable side assist passat value 0x13
0x2DB - BIT 1 - side assist ( bits counted from 0 ), passat value = 0xAE
0x2F6 - BIT 8 - side passat value 0x98
0x2F9 - Bit 1 - yellow side assist ( require led ) - passat value 0x7F
Top
rrador
Posts: 10
Joined: 28 Sep 2023 04:55

Re: Side Assist retrofit

Post by rrador » 30 Dec 2024 22:06

Daku wrote: 30 Dec 2024 19:33 0x454 = BIT 0 - enable side assist passat value 0x13
0x2DB - BIT 1 - side assist ( bits counted from 0 ), passat value = 0xAE
0x2F6 - BIT 8 - side passat value 0x98
0x2F9 - Bit 1 - yellow side assist ( require led ) - passat value 0x7F
Awesome, that worked. Thank you so much.
I just realized that there is supposed to be separate menu also for traffic allert? I think that's what it's called (it's to show oncoming traffic when backing out of the parking spot)
Do you know the values for that menu maybe?

Thanks,
Top
Post Reply

Return to “VDOEditor”

Who is online

Users browsing this forum: No registered users and 1 guest