Page 1 of 1
Support for 3C8 920 880 L ??
Posted: 18 Sep 2016 01:08
by VW_Passat
Hello,
I have a question, VDOEditor supports my instrument cluster with the part number 3C8 920 880 L ?? Is of a VW CC.
I want to change few things.
Thank you in advance for the answers
Re: Support for 3C8 920 880 L ??
Posted: 19 Sep 2016 10:39
by skodapilot
Can You provide SW and HW version (could be read via VCDS or any other OBD software)?
This cluster is not whitelisted, but I do not see problem.
Re: Support for 3C8 920 880 L ??
Posted: 29 Sep 2016 09:34
by didlina77
Its supported if you create your own whitelist
Re: Support for 3C8 920 880 L ??
Posted: 08 Oct 2016 23:02
by VW_Passat
Here is the scan
-------------------------------------------------------------------------------
Adresse 17: Schalttafeleinsatz (J285) Labeldatei: DRV\3C8-920-xxx-17.clb
Teilenummer SW: 3C8 920 880 L HW: 3C8 920 880 L
Bauteil: KOMBI H04 0407
Seriennummer: 00000000000000
Codierung: 160F01
Betriebsnr.: WSC 12345 123 12345
ASAM Datensatz: EV_Kombi_UDS_VDD_RM09 A04114
ROD: EV_Kombi_UDS_VDD_RM09_VW46.rod
VCID: 35655B669413ECB0C2A
Kein(e) Fehlercode(s) gefunden.
-------------------------------------------------------------------------------
Does it also support my instrument cluster? If so, where can I buy the software?
Thanks
Re: Support for 3C8 920 880 L ??
Posted: 10 Oct 2016 14:43
by VW_Passat
And running the Vag Can Pro cable dongle with it?
Re: Support for 3C8 920 880 L ??
Posted: 12 Oct 2016 15:51
by skodapilot
SW04XX
Should work. It could be manualy added into whitelist.
VCP is simply useless regarding clusters: AVDI, VVDI or external programmer should be used. VDOEditor is offline editor, so only BIN files are used.