skodapilot Forum

Hi everyone

I have 2015 passat TDI NMS (usa version).
Retrofitted side assist sensors and mirrors from 2018 NMS passat. I am trying to get side assist menu in the cluster but no luck.

My cluster is 561920970G, HW 05, SW 813.

I used VDO editor to enable side assist menu in the eeprom but it still doesn't show.

Does my SW version not support this?

0x454 = BIT 0 - enable side assist passat value 0x13
0x2DB - BIT 1 - side assist ( bits counted from 0 ), passat value = 0xAE
0x2F6 - BIT 8 - side passat value 0x98
0x2F9 - Bit 1 - yellow side assist ( require led ) - passat value 0x7F

Daku wrote: 30 Dec 2024 19:33 0x454 = BIT 0 - enable side assist passat value 0x13
0x2DB - BIT 1 - side assist ( bits counted from 0 ), passat value = 0xAE
0x2F6 - BIT 8 - side passat value 0x98
0x2F9 - Bit 1 - yellow side assist ( require led ) - passat value 0x7F

Awesome, that worked. Thank you so much.
I just realized that there is supposed to be separate menu also for traffic allert? I think that's what it's called (it's to show oncoming traffic when backing out of the parking spot)
Do you know the values for that menu maybe?

Thanks,