skodapilot Forum

I'll look for the two values directly and enter them into the speedometer with the 11xx. Let's see what happens then. Do you know on which channel I can see the value you describe?

On SW 11xx report old values doesn't work. On 10xx IS ok

If that's the case as you say, what other option do I have? There has to be something to adjust things. I guess I won't be the first to notice this and look for a solution. Otherwise I would have tried it like that
"skodapilot" writes, I mean it can't do more than nothing...... laugh

Ferry wrote:Do you know on which channel I can see the value you describe?

Via vcds it should be named like k_zahl or so, if it is available

Tapatalk

I'm now trying to adopt this from the original EOS speedometer and then see what works or not. and then with vcds look at which channel I find the value. By measured value blocks I think you mean?

Ferry wrote: By measured value blocks I think you mean?

Yes, you should see something like this


Tapatalk

I just compared the original and the new speedometer using the measured value, both have a value of 21960. So the problem must lie somewhere else, right? I'm really a little at a loss.

Wheel circumference type?

Tapatalk

Sorry, my mistake, I did something wrong... the K value is not the same. I have 21960 on the original and 21072 on the new one. Now the question is, how do I get it changed?
The wheel circumference is the same for both in the eeprom, on 01958.

So, I got it changed so that the k number or the displacement impulse (as it is called in the old speedometer) is now 21960. I'll test it out straight away to see if it makes a difference and get back to you straight away.