need Support for 1K8920885

[Ferry]

I'll look for the two values directly and enter them into the speedometer with the 11xx. Let's see what happens then. Do you know on which channel I can see the value you describe?

[Boubou]

On SW 11xx report old values doesn't work. On 10xx IS ok

[Ferry]

If that's the case as you say, what other option do I have? There has to be something to adjust things. I guess I won't be the first to notice this and look for a solution. Otherwise I would have tried it like that
"skodapilot" writes, I mean it can't do more than nothing...... laugh

[skodapilot]

Do you know on which channel I can see the value you describe?

Via vcds it should be named like k_zahl or so, if it is available

Tapatalk

[Ferry]

I'm now trying to adopt this from the original EOS speedometer and then see what works or not. and then with vcds look at which channel I find the value. By measured value blocks I think you mean?

[skodapilot]

By measured value blocks I think you mean?

Yes, you should see something like this


Tapatalk

[Ferry]

I just compared the original and the new speedometer using the measured value, both have a value of 21960. So the problem must lie somewhere else, right? I'm really a little at a loss.

[skodapilot]

Wheel circumference type?

Tapatalk

[Ferry]

Sorry, my mistake, I did something wrong... the K value is not the same. I have 21960 on the original and 21072 on the new one. Now the question is, how do I get it changed?
The wheel circumference is the same for both in the eeprom, on 01958.

[Ferry]

So, I got it changed so that the k number or the displacement impulse (as it is called in the old speedometer) is now 21960. I'll test it out straight away to see if it makes a difference and get back to you straight away.