skodapilot Forum

Hallo,

I want to change colour cluster from Touran 1T3 into Touran 1T2 with red mfa+ cluster and need
help with converting eeprom 24C32 to 24C64.
My new tool is original VVDI2 from Xhorse, will be shipped in a few days.

Could someone please help me with information about the process?

Thank you from germany
1T2_Boy

I can help in wiring and cluster matching

Hallo,

now I got VVDI2 and a cluster adapter from old black one to blue one.
I ordered a used cluster from Touran 1T3 for my Touran 1T2 with the part number 1T0920885, it should be a colour cluster.

A member from another board send me a flash for the cluster with this number : FL_1T0920885K__0611_S
Could I use it or is it only to use for cars with gas and patrol ?

Whats the way to write old immo from 24C32 to new immo 24C64?

I hope someone could help me, I´m new in this.

Thank you
1T2_Boy

ok it seems that the cluster wiring is over with the converter from 36 pin to 32 pin
all i need is to send me pm to check the car with vvdi and anydisk to see what we can do to match the immo and be welll prepared for the new cluster

Thank you for your help.

Could someone explain, how to get full immo with vvdi2?
I only get a small file with 165byte, normal size is 1kb, I think.

Anyone could help with information?

Thank you
1T2_Boy

Hallo,
in windows explorer the 160byte file is marked as 1kb file, and that is normal.
That is the solution for my problem.

Thank you
1T2_Boy