Dear new users!

All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.

5M0920870C read with VVDI2 cannot be loaded into VDOEditor

Discussions of VDOEditor utility and everything regarding VDO clusters
Post Reply
adicristi
Posts: 2
Joined: 01 Oct 2023 20:02

5M0920870C read with VVDI2 cannot be loaded into VDOEditor

Post by adicristi » 01 Oct 2023 20:20

Hi
I read today with VVDI2 tool a cluster 5M0920870C to save the EEPROM.
After I saved the eeprom I tried to load into VDOEditor to activate Staging, but I get an error.
I have some questions here:
1. Supports VDOEditor dumps (eeproms) using VVDI2 tool?
2. IF not, how can I read the dump from the cluster? I have a CH341A programmer and a VVDI Prog.
I will attach here some file here.
Thank you!

Later Edit:
I think, based on what I select in VVDI2, inside is a Motorola (9S12XHZ512).
Probably this is the reason?
You do not have the required permissions to view the files attached to this post.
Top
skodapilot
Site Admin
Posts: 464
Joined: 13 Jan 2014 06:18

Re: 5M0920870C read with VVDI2 cannot be loaded into VDOEditor

Post by skodapilot » 01 Oct 2023 20:58

adicristi wrote: ↑01 Oct 2023 20:20 I think, based on what I select in VVDI2, inside is a Motorola (9S12XHZ512).
Probably this is the reason?
You are quite right. This is not NEC850 based dashboard, so it doesn't supported...
Top
adicristi
Posts: 2
Joined: 01 Oct 2023 20:02

Re: 5M0920870C read with VVDI2 cannot be loaded into VDOEditor

Post by adicristi » 02 Oct 2023 14:52

Thank you for clarification!
Have a great day!
Top
Post Reply

Return to “VDOEditor”

Who is online

Users browsing this forum: No registered users and 0 guests