Hi All
May be you can help me with this case
I bought a cluster with the reference 3AA 920 880 N
I made step by step the next yputube video (it is the same cluster)
2D to 3D
Step 1 .. get the OLD EEPROM, NO PROBLEM
Step 2 ... Flash the unit with VCP to get 3D --- NO PROBLEM
Step 3 .. Write the 3C8920881A_04_1104 EEPROM .... MISTAKE the dash shows "ERROR" on odometer
Next try ..
Before I write the 3C8920881A_04_1104 EEPROM i made a copy of the cluster once I had made Step 2. Let's call it "EPPROM step 2"
Using EEPROM step 2 with the data of EEPROM of the Golf VI GTI (The cluster is for a Golf VI GTI) I change Speedometer, Tachometer, Handbrake ..... even with smok I can change kms and send the inmo data
The problem is I can not change the CODING of the dash, it is impposible with VAGCOM , it always says "Coding Rejected, ERROR 31"
Any idea??
Can someone tell me the hardware changes from electric handbrake to manual handbrake??
and
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
Problem converting VW cluster color to 3D
-
- Posts: 32
- Joined: 02 Feb 2022 10:53
Re: Problem converting VW cluster color to 3D
Most of the time ERROR indicates a wrong mileage
Did you made a back up of all settings before you started upgrading the cluster?
Did you made a back up of all settings before you started upgrading the cluster?
Who is online
Users browsing this forum: No registered users and 3 guests