Dear new users!

All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.

Dial Swap

Discussions of VDOEditor utility and everything regarding VDO clusters
Post Reply
paulfrieberg
Posts: 8
Joined: 28 Jul 2020 13:42

Dial Swap

Post by paulfrieberg » 16 May 2021 19:32

Hello, i have a 1K8920871 Cluster in my 2010 Scirocco.

It has the 0x00: 1K8/1Q0/1T0 etc.. Indicator Layout. Now i bough some Dial plates that has the Layout 0x0A: 1k8/1T0/56D/7N0.

I tried to change the layout in my Cluster Dump.
But it did not work. No Indicator did show up in any way.
I tried to test it with VCDS, did an output test but as i tried,
the Disyplay went dark and nothing lit up.

Does anyone have an idea why my Cluster would not accept the Layout ? Do i need to change something else ? Or to code something different ?

Greetings from Germany Paul.

Daku
Posts: 85
Joined: 23 Feb 2018 20:42

Re: Dial Swap

Post by Daku » 17 May 2021 23:35

I found info that Yours PN 1K8920871 have ~ SW 0206 or better to say 02xx.

Scirocco scale is available from 07 or 08 if i remember correctly for BW cluster.

i'm talking about that
Scirocco.jpg

I Can help You with remote update Yours 02xx to 07 or 08 if eeprom is available.
You do not have the required permissions to view the files attached to this post.

paulfrieberg
Posts: 8
Joined: 28 Jul 2020 13:42

Re: Dial Swap

Post by paulfrieberg » 18 May 2021 16:54

Yes! This is the exact scale i have. Does it work with VDOeditor ? I bought it. So if it would work it would be so nice from you if you could tell me wich Setting i need. Another tough i had is, that i may have some LEDs and Resistors unpopulated, if so it qould not be a Problem, i could solder some SMD there. I will ad a screen shot in Attachments.

Thanks in advance. Paul
You do not have the required permissions to view the files attached to this post.

paulfrieberg
Posts: 8
Joined: 28 Jul 2020 13:42

Re: Dial Swap

Post by paulfrieberg » 18 May 2021 18:54

Here is my Cluster dump btw. I just renamed it rar because Bin file format is not supportet by attachments.
You do not have the required permissions to view the files attached to this post.

skodapilot
Site Admin
Posts: 463
Joined: 13 Jan 2014 06:18

Re: Dial Swap

Post by skodapilot » 19 May 2021 13:49

I think Daku means that you have to update firmware version of your dashboard from old 02** series upto 07**/08** series to enable possibility change LED layout.

paulfrieberg
Posts: 8
Joined: 28 Jul 2020 13:42

Re: Dial Swap

Post by paulfrieberg » 19 May 2021 18:58

Ok i understand, hwo do it update this ? :o

Daku
Posts: 85
Joined: 23 Feb 2018 20:42

Re: Dial Swap

Post by Daku » 20 May 2021 22:48

As SkodaPIlot said, I mean Flash update From 02xx to 07/08. Only in this SW scirocco is available, same as wellcome screen
scirocco.jpg
If you have Odis or Vag can pro, i can do it remote. But we must cooperate, and prepare good final EEPROM to You.

Greetings
You do not have the required permissions to view the files attached to this post.

paulfrieberg
Posts: 8
Joined: 28 Jul 2020 13:42

Re: Dial Swap

Post by paulfrieberg » 22 May 2021 13:15

Yes i only have a EEPROM reader not VCP/ODIS but i will buy VCP soon. It would be very nice if you could assist me then. Thanks in advance!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests