Page 1 of 1
EOS Sliding roof indicator
Posted: 19 Oct 2020 17:34
by Kraken
Hi,
I installed scirocco White ODB 1K8920873A BW on EOS from red OBD but I lost sliding roof indicator.
I set up "Sun roof indicator" in VDO editor but it does not work.
Do you have solution or eeprom address for this parameter ?
thanks for help.
regards
Re: EOS Sliding roof indicator
Posted: 19 Oct 2020 18:23
by Daku
did you have can analyser ?
You can simply test that indicator works
Hidden Content
This board requires you to be registered and logged-in to view hidden content.
Re: EOS Sliding roof indicator
Posted: 19 Oct 2020 18:40
by Kraken
Hi Daku,
thanks for answer
Yes I have canhacker.
I will try ! Thanks
by the way, we have the following pin: T26/9 linked to sliding roof controller-J245-
Re: EOS Sliding roof indicator
Posted: 19 Oct 2020 19:26
by Kraken
I made the test but not work.
I checked wire between T28/9 and T36/29 and it is missing... I think it is the reason
thanks again Daku
Re: EOS Sliding roof indicator
Posted: 21 Oct 2020 20:02
by droid
Kraken wrote: ↑19 Oct 2020 17:34
Hi,
I installed scirocco White ODB 1K8920873A BW on EOS from red OBD but I lost sliding roof indicator.
I set up "Sun roof indicator" in VDO editor but it does not work.
Do you have solution or eeprom address for this parameter ?
thanks for help.
regards
Isn't the issue here that a "red display" cluster EOS vehicle has a CECM, whereas a "white display" cluster EOS normally has a BCM so the communication is different?
Re: EOS Sliding roof indicator
Posted: 22 Oct 2020 23:23
by Kraken
I will check and report here as soon as I get new adapter.