skodapilot Forum

I put the 5N0920883E counter for VW Multivan. I have the problem of immobilizer information, e.g. in ABS. The direction indicator lamps do not work. The car starts normally. Does any of your colleagues have an idea or can you master it? In the ee connector from the meter

I think that fastest way is using of 7N0 920 880 G dumps as reference

I was thinking from a sharan. You could have a .sgo file (.frf, .odx) up to such a clock, try to flash

Tiguan PQ 35 Multivan Polo Amarok PQ25 there is a problem with the swap eeprom turn signals will not help

Eeprom swap with mileage section should help.
Could you send VCDS errors or full autoscan ?? on PM if here you cant

Tiguan dashboard is PQ35 VW Multivan PQ 25 difference in BCM, swap eeprom does not help need to play flash

I have played with this a bit

Even with pq25 nec and eeprom on pq35 board, functions dont work like indicators. Must be some other hardware difference on the pcb

Hello

Has anyone managed to solve this problem with the adaptation of the counter in T5?