skodapilot Forum

Hello Guys,
I am new as you can see hehe i am from Argentina.
So i am looking to have your guide on what is best for me in this situation:
I have a vw jetta mk6 2012 with intrument cluster 5C6920871 and i just bought a vw tiguan 2015 3d color premiun cluster 5N0920883D to do the swap, of course prior to do it i need to do some preparations.
I came here because some user in cartechnology mentioned the vdo editor as a savior, can you tell me which will be the best possible next steps?
The sw of the new cluster is 0705, so i assume its a 3d color one.
do i need to dump my original 24c64 rom into the new tiguan cluster? is this going to be ok?
Also i saw that it will requires speedmeter calibration, is this anything that can be done via VCDs? or how can i do it?
Any help will be appreciate it,i have a eeprom programming USB to read the roms!.
Thanks a lot in advance
Best Regards

- adjust IMMO;
- transfer curves of fuel sensors from old dump
- replace scale if it is necessary.

skodapilot wrote: ↑18 May 2020 20:54 - adjust IMMO;
- transfer curves of fuel sensors from old dump
- replace scale if it is necessary.

Can your guide how to do it? Vdo editor should help on this? If so I will buy it for sure..

Also I want to know how to update the firmware
Thanks you

martocapo wrote: ↑19 May 2020 04:06 Can your guide how to do it? Vdo editor should help on this? If so I will buy it for sure..

Also I want to know how to update the firmware
Thanks you

Send you PM with to do plan. VDOe can do it, so I didn't provide offsets for step by step modification.
Why do you want to update firmware? You can do it if you want, but what's the reason?

skodapilot wrote: ↑19 May 2020 14:57

martocapo wrote: ↑19 May 2020 04:06 Can your guide how to do it? Vdo editor should help on this? If so I will buy it for sure..

Also I want to know how to update the firmware
Thanks you

Send you PM with to do plan. VDOe can do it, so I didn't provide offsets for step by step modification.
Why do you want to update firmware? You can do it if you want, but what's the reason?

currently is 0701 i dont if its a color 3d but my intentation is to update if worst the case, i mean is there any improve to do it?

skodapilot wrote:

martocapo wrote: ↑19 May 2020 04:06 Can your guide how to do it? Vdo editor should help on this? If so I will buy it for sure..

Also I want to know how to update the firmware
Thanks you

Send you PM with to do plan. VDOe can do it, so I didn't provide offsets for step by step modification.
Why do you want to update firmware? You can do it if you want, but what's the reason?

could you please someone tell me if cluster 3AD920880, hw04, sw0508 (Passat B7) 2D to 3D?
Thx


从我的 iPhone 发送，使用 Tapatalk

znleling wrote: ↑24 Oct 2020 04:28

skodapilot wrote:

martocapo wrote: ↑19 May 2020 04:06 Can your guide how to do it? Vdo editor should help on this? If so I will buy it for sure..

Also I want to know how to update the firmware
Thanks you

Send you PM with to do plan. VDOe can do it, so I didn't provide offsets for step by step modification.
Why do you want to update firmware? You can do it if you want, but what's the reason?

could you please someone tell me if cluster 3AD920880, hw04, sw0508 (Passat B7) 2D to 3D?
Thx


从我的 iPhone 发送，使用 Tapatalk

I dont know if too late but its 2D colored