Page 3 of 4
Re: Cluster downgrade from 1008 to 611
Posted: 20 Jul 2021 21:25
by dnoermann
Shure, PM is send.
Re: Cluster downgrade from 1008 to 611
Posted: 24 Jan 2022 02:10
by martocapo
Hi guys, can any of you share the odx file with me of the firmware of my cluster? I have a Tiguan cluster 5N0920883D SW705 AND I want to upgrade to 1008 or higher.
Thanks
Re: Cluster downgrade from 1008 to 611
Posted: 18 Feb 2022 20:52
by martocapo
dnoermann wrote: ↑20 Jul 2021 21:25
Shure, PM is send.
Hi Can you share to me as well?
Re: Cluster downgrade from 1008 to 611
Posted: 01 Jul 2022 11:42
by Dubber
Have anyone found the solution to downgrade sw?
Re: Cluster downgrade from 1008 to 611
Posted: 04 Aug 2022 13:17
by Daku
Not possible via OBD to go lower than 0705.
Any SW have lock e.g. 05 can be downgraded to 04 but cannot to 02.
06 can be only updated higher.
I can lower Yours sw to 0132 but need cluster in Poland
Re: Cluster downgrade from 1008 to 611
Posted: 19 Sep 2022 22:10
by mohamed aos
Batch88 wrote: ↑15 Mar 2020 21:37
I succesfull downgrade to 705 with odis,not problem,but if try to downgrade sw611 or low the flash fail
could you please attach the flash file for 705 software ?
Re: Cluster downgrade from 1008 to 611
Posted: 18 Oct 2022 08:11
by mkalu
Hello friends!
I`m trying to combine a 0506 vw dashboard and 3D display from Audi cluster.
I`m looking for a 0611 or 0705 software file, could somebody share it?
Thanks
Re: Cluster downgrade from 1008 to 611
Posted: 11 Nov 2022 20:26
by Boubou
Hi there,
I'm going to have a Tiguan 0611 cluster that I want to go into 3D to put in my Golf 5, can I use the FL_1K8920885H__1018_S.odx file to get a 3d?
Thanks in advance.
Re: Cluster downgrade from 1008 to 611
Posted: 12 Feb 2023 15:54
by ozu
Hello,
I have a 3d cluster of tiguan 5N0920883G HW04 in version 1008 and I want to downgrade to 705, does anyone have the firmware to downgrade?
Thank you very much in advance
Re: Cluster downgrade from 1008 to 611
Posted: 17 Feb 2023 07:54
by rsarre
Ewald wrote: ↑18 Oct 2020 14:09
Problem solved. There is an issue in the French 1K8920885L EEPROM from database. Build my own EEPROM based on version after update and it works.
Look for this EEPROM:
HW: 1K8920885C
SW: 1K8920885L
HW: 04
SW from factory: 0704
SW currenlty: 1109
240 km/h (changed)
how did you fix it? i have the same error U1111 00 [009] - -
[Steuergerät für Tür Fahrerseite: keine Kommunikation]
i installed a 3d cluster on an eos 2010