Page 2 of 4
Re: Cluster downgrade from 1008 to 611
Posted: 26 Jun 2020 02:28
by Kraken
Hi jokir,
I need it because SW1109 seems not compatible with keyless and ELV and I must downgrade.
thanks for your help.
regards
Re: Cluster downgrade from 1008 to 611
Posted: 27 Jun 2020 17:19
by jokir
What tool do you use to read?
Attach eeprom and immoblock here.
Where are you from ?
Re: Cluster downgrade from 1008 to 611
Posted: 28 Jun 2020 23:32
by Daku
Downgrade to 0705 to Green side assist diode working up to 07xx sw, above this version only yellow works
Re: Cluster downgrade from 1008 to 611
Posted: 29 Jun 2020 00:58
by Kraken
jokir wrote: ↑27 Jun 2020 17:19
What tool do you use to read?
Attach eeprom and immoblock here.
Where are you from ?
Hi,
I attached files here.
immo bloc comes from smok uhds
thanks
Re: Cluster downgrade from 1008 to 611
Posted: 28 Aug 2020 02:48
by hawkeye
Kraken wrote: ↑26 Jun 2020 02:28
Hi jokir,
I need it because SW1109 seems not compatible with keyless and ELV and I must downgrade.
thanks for your help.
regards
SW 1109 is compatible with kessy, it is necessary to change the configuration in immo
Re: Cluster downgrade from 1008 to 611
Posted: 01 Sep 2020 11:12
by jokir
The problem has already been solved
Re: Cluster downgrade from 1008 to 611
Posted: 18 Oct 2020 04:22
by Ewald
Hi all,
i have upgraded from 1018 to 1109 and now a fault related to communication with door control unit. Do you know a solution for this?
12687616 - Funktionseinschränkung wegen fehlender Botschaft
U1111 00 [009] - -
[Steuergerät für Tür Fahrerseite: keine Kommunikation]
Re: Cluster downgrade from 1008 to 611
Posted: 18 Oct 2020 14:09
by Ewald
Problem solved. There is an issue in the French 1K8920885L EEPROM from database. Build my own EEPROM based on version after update and it works.
Look for this EEPROM:
HW: 1K8920885C
SW: 1K8920885L
HW: 04
SW from factory: 0704
SW currenlty: 1109
240 km/h (changed)
Re: Cluster downgrade from 1008 to 611
Posted: 21 Dec 2020 00:08
by dnoermann
I like to upgrade Premium 3D from 1008 to 11xx.
Can someone share the File or Method for this.
I can dump the Firmware of a Cluster myself, i have 1104 1105 1109 as binary but was hoping someone can share a frf/odx for simple and safe OBD Update ...
Re: Cluster downgrade from 1008 to 611
Posted: 10 Jul 2021 16:19
by MaDwArLoCk
dnoermann wrote: ↑21 Dec 2020 00:08
I like to upgrade Premium 3D from 1008 to 11xx.
Can someone share the File or Method for this.
I can dump the Firmware of a Cluster myself, i have 1104 1105 1109 as binary but was hoping someone can share a frf/odx for simple and safe OBD Update ...
Hi frend,
could you please share with me one of your binaries?
I have tried to reflash a Tiguan cluster 611 to 1008 and VCP stoped working during update
it is not possible to flash it anymore via OBD, only directly with the programmer.
but unfortunately, i don't have necessary BIN to try.
I would be very appreciated to any BIN you can share 0611 or 0705 or 1xxx