Hello All,
I would like ask you have i can configure vaghelper for US lights ( Front turn lights with brightness 30% + 100% for turn signal ) ?
I dont really understand how i can configure 2 different brightness for example for A10,C50 (turn front L+R).
thanks a lot for help.
US lights for octavia 2 FL
-
- Site Admin
- Posts: 463
- Joined: 13 Jan 2014 06:18
Re: US lights for octavia 2 FL
As far as I remember, It should be coded like this
Unlike MQB, you code only one brightness due to second is always 100%-
- Posts: 6
- Joined: 04 May 2019 15:45
Re: US lights for octavia 2 FL
ok i will try it, where i can found some manual for vaghelper ? I am still dont understand of logic for it.
When i marked in function turn signal, park lights and daytime running lights and brightness will be 33% so for what will be 100% brightness?
When i marked in function turn signal, park lights and daytime running lights and brightness will be 33% so for what will be 100% brightness?
-
- Site Admin
- Posts: 463
- Joined: 13 Jan 2014 06:18
Re: US lights for octavia 2 FL
I don't understand fully too, even I'm developer. It is not joke. VAGHelper is result of reverse engineering. There are several blind spots
-
- Posts: 6
- Joined: 04 May 2019 15:45
Re: US lights for octavia 2 FL
ok no problem i am testing it . Nevetheless US lights working as expected. thanks .
-
- Posts: 6
- Joined: 04 May 2019 15:45
Re: US lights for octavia 2 FL
today i tried to test US lights at passat b7 2010. Same procedure as for Octavia 2 FL but it doesnt work. I configured A10(front turn signal) for 33% but after write configuration to ecu ligthning turn front signals with 100% brightness . So i dont understand of logic of program. Can you help me with it ?
Do you need screen of BCM or something ?
Do you need screen of BCM or something ?
-
- Site Admin
- Posts: 463
- Joined: 13 Jan 2014 06:18
Re: US lights for octavia 2 FL
Are You sure that value is applied? What about 18th byte of long coding?
-
- Posts: 6
- Joined: 04 May 2019 15:45
Re: US lights for octavia 2 FL
What was changed is just that turn signal lighting at 100%. I will check later autoscan how was set up bit18. it should be 00 ?
-
- Site Admin
- Posts: 463
- Joined: 13 Jan 2014 06:18
-
- Posts: 6
- Joined: 04 May 2019 15:45
Re: US lights for octavia 2 FL
output from autoscan. If i am counting right , that byte 18 is 00
Address 09: Cent. Elect. (J519) Labels:. 3AA-937-087.clb
Part No SW: 3AA 937 087 B HW: 3AA 937 087 B
Component: BCM PQ47 H+ 413 0452
Revision: BC413001
Coding: 000000000000000000180080140029F463D50088606C8160E480C7240041
Shop #: WSC 05311 000 00000
VCID: 392ED8D8E953009F993-806C
Subsystem 1 - Part No SW: 3AB 955 419 HW: 3AB 955 419 Labels: 1KX-955-119.CLB
Component: Wischer 14021 10 0603
Coding: 00B795
Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 140311 05 54 0403
Coding: 033028
So that was configured well.
Address 09: Cent. Elect. (J519) Labels:. 3AA-937-087.clb
Part No SW: 3AA 937 087 B HW: 3AA 937 087 B
Component: BCM PQ47 H+ 413 0452
Revision: BC413001
Coding: 000000000000000000180080140029F463D50088606C8160E480C7240041
Shop #: WSC 05311 000 00000
VCID: 392ED8D8E953009F993-806C
Subsystem 1 - Part No SW: 3AB 955 419 HW: 3AB 955 419 Labels: 1KX-955-119.CLB
Component: Wischer 14021 10 0603
Coding: 00B795
Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 140311 05 54 0403
Coding: 033028
So that was configured well.
Who is online
Users browsing this forum: No registered users and 1 guest