Dear new users!

All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.

US lights for octavia 2 FL

Discussions of VAGHelper utility and everything regarding light schemes of platform PQ35/46
rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

US lights for octavia 2 FL

Post by rrozbroj » 04 May 2019 15:50

Hello All,
I would like ask you have i can configure vaghelper for US lights ( Front turn lights with brightness 30% + 100% for turn signal ) ?
I dont really understand how i can configure 2 different brightness for example for A10,C50 :) (turn front L+R).
thanks a lot for help.

skodapilot
Site Admin
Posts: 294
Joined: 13 Jan 2014 06:18

Re: US lights for octavia 2 FL

Post by skodapilot » 04 May 2019 17:50

As far as I remember, It should be coded like this
Hidden Content
This board requires you to be registered and logged-in to view hidden content.


Unlike MQB, you code only one brightness due to second is always 100%

rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

Re: US lights for octavia 2 FL

Post by rrozbroj » 04 May 2019 18:53

ok i will try it, where i can found some manual for vaghelper ? I am still dont understand of logic for it.

When i marked in function turn signal, park lights and daytime running lights and brightness will be 33% so for what will be 100% brightness?

skodapilot
Site Admin
Posts: 294
Joined: 13 Jan 2014 06:18

Re: US lights for octavia 2 FL

Post by skodapilot » 04 May 2019 22:38

I don't understand fully too, even I'm developer. It is not joke. VAGHelper is result of reverse engineering. There are several blind spots

rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

Re: US lights for octavia 2 FL

Post by rrozbroj » 04 May 2019 22:41

:) ok no problem i am testing it . Nevetheless US lights working as expected. thanks .

rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

Re: US lights for octavia 2 FL

Post by rrozbroj » 14 May 2019 16:05

today i tried to test US lights at passat b7 2010. Same procedure as for Octavia 2 FL but it doesnt work. I configured A10(front turn signal) for 33% but after write configuration to ecu ligthning turn front signals with 100% brightness . So i dont understand of logic of program. Can you help me with it ?
Do you need screen of BCM or something ?

skodapilot
Site Admin
Posts: 294
Joined: 13 Jan 2014 06:18

Re: US lights for octavia 2 FL

Post by skodapilot » 15 May 2019 09:42

Are You sure that value is applied? What about 18th byte of long coding?

rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

Re: US lights for octavia 2 FL

Post by rrozbroj » 15 May 2019 11:08

What was changed is just that turn signal lighting at 100%. I will check later autoscan how was set up bit18. it should be 00 ?

skodapilot
Site Admin
Posts: 294
Joined: 13 Jan 2014 06:18

Re: US lights for octavia 2 FL

Post by skodapilot » 15 May 2019 12:23

rrozbroj wrote:
15 May 2019 11:08
What was changed is just that turn signal lighting at 100%. I will check later autoscan how was set up bit18. it should be 00 ?
yes. Due to it acts as pointer. If you change this value, other addresses are used by BCM to configure light scheme

rrozbroj
Posts: 6
Joined: 04 May 2019 15:45

Re: US lights for octavia 2 FL

Post by rrozbroj » 16 May 2019 20:10

output from autoscan. If i am counting right , that byte 18 is 00

Address 09: Cent. Elect. (J519) Labels:. 3AA-937-087.clb
Part No SW: 3AA 937 087 B HW: 3AA 937 087 B
Component: BCM PQ47 H+ 413 0452
Revision: BC413001
Coding: 000000000000000000180080140029F463D50088606C8160E480C7240041
Shop #: WSC 05311 000 00000
VCID: 392ED8D8E953009F993-806C

Subsystem 1 - Part No SW: 3AB 955 419 HW: 3AB 955 419 Labels: 1KX-955-119.CLB
Component: Wischer 14021 10 0603
Coding: 00B795

Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 140311 05 54 0403
Coding: 033028

So that was configured well.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests