Page 1 of 2
Park Assist Error
Posted: 05 Oct 2018 17:54
by ecarruda
Hey Guys,
I did cluster retrofit on Jetta using Tiguan (5n0 920 883 D) cluster but Park Assist display don't show CAR icon. Ideias?
Re: Park Assist Error
Posted: 05 Oct 2018 18:12
by ecarruda
VCDS Log:
Address 10: Park/Steer Assist (J791) Labels:| 3AA-919-475.clb
Part No SW: 3AA 919 475 S HW: 4H0 919 475 E
Component: PARKHILFE PLA H06 0043
Revision: -------- Serial number: 56261613200610
Coding: 348107
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_EPHVA2C000000000 002014
ROD: EV_EPHVA2C000000000.rod
VCID: 4BBB810FE23BE91270-801E
1 Fault Found:
12658720 - Databus
U1121 00 [009] - Missing Message
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 170
Mileage: 84351 km
Date: 2018.10.05
Time: 08:40:03
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 5N0 920 883 D HW: 5N0 920 883 D
Component: KOMBI H03 0705
Serial number: 00000000000000
Coding: 171D01
Shop #: WSC 01357 011 00200
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04727
ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
VCID: 354FC7F794BF8FE236-8060
No fault code found.
Re: Park Assist Error
Posted: 05 Oct 2018 19:02
by m87a
in 3D cluster when you select some other car like golf or jetta, which are missing (not intended for these cars) there is no car icon in parallel parking
i have left Tiguan icon and no issues, maybe you need to select passat?
Re: Park Assist Error
Posted: 05 Oct 2018 20:27
by jokir
Passat and tiguan should work
Re: Park Assist Error
Posted: 22 Oct 2018 23:02
by ecarruda
When i select passat choise on PLA module i have this error:
Re: Park Assist Error
Posted: 23 Oct 2018 23:37
by Gilgamesh
Try to read the error by OdisE. It should show from which ECU is the missing message, may be from ABS.
Re: Park Assist Error
Posted: 31 Oct 2018 16:32
by ecarruda
Gilgamesh wrote: ↑23 Oct 2018 23:37
Try to read the error by OdisE. It should show from which ECU is the missing message, may be from ABS.
There is result:
Re: Park Assist Error
Posted: 24 Nov 2018 20:04
by ecarruda
jokir wrote: ↑05 Oct 2018 20:27
Passat and tiguan should work
Passat with 0C byte set? We have 3 Passat options: CC, Limo and Variant
Re: Park Assist Error
Posted: 03 Dec 2018 18:23
by ecarruda
Changed Car Icon to 0C ( Passat Limo ) Worked...
Re: Park Assist Error
Posted: 23 Dec 2018 04:25
by 00Bob
ecarruda wrote: ↑03 Dec 2018 18:23
Changed Car Icon to 0C ( Passat Limo ) Worked...
Where do you change the value? In the cluster, or the PLA module?
I ask that because i have a Jetta too, and i have the same problem, but with the TPMS Direct module.
I still have no car icon in the middle!!!
