Hello,
i have 5N0920871C black/white cluster from tiguan with 24C32 inside, and i want to use it in 2007 golf MKV
before buying your sw my question is :
is this cluster supported by VDO editor? i need to modify number of fuel level sensors, hand brake , maybe fuel tank curve characteristic,staging etc
thank you!
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
tiguan 5N0920871C
-
- Posts: 11
- Joined: 26 Aug 2018 17:51
Re: tiguan 5N0920871C
Hello,
please can anybody answer my question from first post?
on "https://skodapilot.com/vdoeditor/?lang=en" in vdo editor section i found this:
"Any questions regarding software functionality You can ask using official forum thread"
but no answer here... or maybe posted in wrong place?
Thank you !
please can anybody answer my question from first post?
on "https://skodapilot.com/vdoeditor/?lang=en" in vdo editor section i found this:
"Any questions regarding software functionality You can ask using official forum thread"
but no answer here... or maybe posted in wrong place?
Thank you !
-
- Posts: 85
- Joined: 23 Feb 2018 20:42
Re: tiguan 5N0920871C
Your cluster isn't listed in builtin list, but you can add it to whitelist.xml, i add other 24c32 cluster to whitelist and all works, curves too.
I Think 24c64 works too, @Skodapilot have tiguan cluster. If you do stuff unsuccessfully please PM I help you
I Think 24c64 works too, @Skodapilot have tiguan cluster. If you do stuff unsuccessfully please PM I help you
-
- Posts: 11
- Joined: 26 Aug 2018 17:51
Re: tiguan 5N0920871C
Hello,
thank you for your answer ,as you read in my first post in this moment i don`t own VDO Editor, i plane to buy it, so i don`t understand exactly how it works and what is whitelist....and also if it can help me to finish my project with instrument cluster swapping.
Thank you anyway !
-
- Posts: 85
- Joined: 23 Feb 2018 20:42
Re: tiguan 5N0920871C
Whitelist allow VDOeditor to recognize cluster as correct cluster, but i don't give 100% success rate. If you fail then I try to Help you wtih your cluster and eeprom.
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: tiguan 5N0920871C
24c32 has limited support from VDOeditor due to in most case it is old and rare.rocris wrote: ↑26 Aug 2018 18:00 Hello,
i have 5N0920871C black/white cluster from tiguan with 24C32 inside, and i want to use it in 2007 golf MKV
before buying your sw my question is :
is this cluster supported by VDO editor? i need to modify number of fuel level sensors, hand brake , maybe fuel tank curve characteristic,staging etc
thank you!
You CAN NOT do over VDOeditor with 24c32 based cluster:
- change fuel sensor count via combobox of VDOeditor
- change hand brake type via combobox of VDOeditor
You CAN do over VDOeditor with 24c32 based cluster:
+ change curves
+ change scales
+ use swap wizard
Last edited by skodapilot on 27 Mar 2019 11:02, edited 1 time in total.
Reason: Removed corrupted attachment
Reason: Removed corrupted attachment
-
- Posts: 11
- Joined: 26 Aug 2018 17:51
Re: tiguan 5N0920871C
Thank you, is clear now for me . I see that in your pics that you used as example for me, a 24c32 dump from a 5N0920871C cluster with one fuel sensor , please if is possible, give me your dump to compare with my dump which is with 2 sensors , maybe i can find differences and modify my dump to have only one sensor.skodapilot wrote: ↑28 Aug 2018 21:5224c32 has limited support from VDOeditor due to in most case it is old and rare.rocris wrote: ↑26 Aug 2018 18:00 Hello,
i have 5N0920871C black/white cluster from tiguan with 24C32 inside, and i want to use it in 2007 golf MKV
before buying your sw my question is :
is this cluster supported by VDO editor? i need to modify number of fuel level sensors, hand brake , maybe fuel tank curve characteristic,staging etc
thank you!
You CAN NOT do over VDOeditor with 24c32 based cluster:
- change fuel sensor count via combobox of VDOeditor
- change hand brake type via combobox of VDOeditorYou CAN do over VDOeditor with 24c32 based cluster:► Show Spoiler
+ change curves
+ change scales
+ use swap wizard► Show Spoiler
Thank you!
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: tiguan 5N0920871C
Try to use this, but there are will be a lot of differences. It will take your time...
I suggest that swapping wizard could solve this faster, but You have no VDOeditor and I did not perform this procedure myself on this PN with your requirements to be sure it works.
I suggest that swapping wizard could solve this faster, but You have no VDOeditor and I did not perform this procedure myself on this PN with your requirements to be sure it works.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 11
- Joined: 26 Aug 2018 17:51
Re: tiguan 5N0920871C
Thank you ! will try it also will buy VDO Editorskodapilot wrote: ↑29 Aug 2018 09:33 Try to use this, but there are will be a lot of differences. It will take your time...
I suggest that swapping wizard could solve this faster, but You have no VDOeditor and I did not perform this procedure myself on this PN with your requirements to be sure it works.
Who is online
Users browsing this forum: Google [Bot] and 12 guests