skodapilot Forum

Hi guys,

Is there a way to show the gear with an automatic transsmission (see pic)?



In my car i only have the "D" or "S". If i go on manual shiffting, i can see the gear i'm in.

Thanks in advance!

As far as I remember it is question of DSG firmware. Try EU version, I think it will help

Tapatalk

this part comes from the ECU, depending on that it wil show or not.
as this is an blue motion option

Ditmar103 wrote:this part comes from the ECU, depending on that it wil show or not.
as this is an blue motion option

Hi Ditmar103 are you familiar with activating the cruise set speed in the cluster, i understand it’s determined by the ECU.

Regards

Sorry for the late reply!

Thanks for your information. I will check and come back if i find something!

00Bob wrote:Sorry for the late reply!

Thanks for your information. I will check and come back if i find something!

That would be great if you could Bob,

Many thanks

If you are running with 09G transmission it's easy. Just change coding Tiguan coding works, if i can remember it's 328

No chance, i have this: SW: 02E 300 064 T HW: 02E 927 770 AT.

ecarruda wrote: ↑02 Oct 2018 00:56 If you are running with 09G transmission it's easy. Just change coding Tiguan coding works, if i can remember it's 328

After some research and tests, my kind of DSG/ECU can't be code to display the gear...

Thanks anyway everyone!

Hi everyone

Are somebody know how to display a current gear in the center?

Skoda yeti 1.8 dsg 2013

Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb
Part No SW: 5L0 920 840 L HW: 5L0 920 840 L
Component: KOMBI H05 0811
Serial number: 00000000000000
Coding: 120E01