Value change in cluster eeprom offset 0x341.
For jetta try use value 03 or 08 or 0D
Yours TMPS should be disabled if there isn't wheel with sensor.
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
Park Assist Error
-
- Posts: 30
- Joined: 07 Aug 2016 22:52
Re: Park Assist Error
Thanks, i will try that!!!
For your information, it's normal to have "---" when you start your car. You have to drive approximately 100m to see pressure value.
-
- Posts: 85
- Joined: 23 Feb 2018 20:42
Re: Park Assist Error
At 3aa module and sensors data is always available even if you turn ignition only then sensors show air pressure. If you remove all whells then system set status to disabled and menu disapear
Who is online
Users browsing this forum: No registered users and 1 guest