flash 5QO907273B with 3AA907273F sw

[SanketM]

Hi thank you so much for describing the flash procedure. Probably its my bad that I missed giving context of what I am doing. I had a 3AA902273B which I was able to flash to 3AA902273D. Now since I wanted the sensors to be detected automatically, I wanted to flash it to F version. But it keeps failing while trying to get a seed to flash the TPMS ECU. From that I understand the Security Access code thats being used by VCP to flash the file is incorrect.

There is a possibility that the flash file I am using to update the TPMS Module is modified. As the EXPECTED-IDENT specifies 5Q0 modules

[skodapilot]

EXPECTED-IDENT is not really important for programming session: this list is used only by flashing software (f.e. ODIS E or VCP). To unlock access to flash firmware only SA is important and session type. Software can validate selected ECU by partnumber, but there is no problem to skip this validation if you know you are doing.
So try first play with session type first and project type

[Felix59]

Hello everyone,
Sorry, this may not be the right place to post this, but I'm new here and don't really know how to navigate.
I have a problem - I installed the 5Q0907273B module and wanted to flash this file --> FL_5Q0907273___0011.frf using VCP Pro.
Unfortunately, the program recognizes the module, but when I try to flash it, I get the message shown in the screenshot.
I have a request: can someone help me solve the problem?

Secondly, I can't flash this file created with the RDKS.exe program ---> 5Q0907273_Lato_vcp.xml (there's another file in the folder, but it's a .bin file), it also freezes and there's no communication.
I checked VCDS - no errors, the module is visible in Gateway - 65.
I tried to perform all flash operations using VCP Pro. My experience with this type of "promotion" is limited, so I'm asking for help.

I'd like to upgrade version 5Q0907273B and flash the new summer and winter tire data.

What am I doing wrong?????

[skodapilot]

Regarding firmware update - try to change session type i.e. EOL...
Regarding dataset uploading, ensure you select VCP style format...

[Felix59]

Thank you very much for your answer.
Honestly, I don't have as much knowledge as you and...
"Regarding the firmware update, try changing the session type, e.g., EOL..."<---- please provide a little more information on this. Where to change it.....
And regarding the data set, I'm 100% sure I'm selecting the .VCP file in the program.
The attached file is the one I'm trying to flash, the .xlm one, of course. By the way, what's the .bin file for?

[skodapilot]

see at the bottom of one of your screenshots: you use standard diagnose , you can change it.
it could be problem of project vw37, but i do not remember how to change it in vcp

[Felix59]

Thank you.
As soon as I'm in the car with VCP connected, I'll change the diagnosis type in the highlighted box (attachment).
I'll let you know the results.