Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
need Support for 1K8920885
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
I'll look for the two values directly and enter them into the speedometer with the 11xx. Let's see what happens then. Do you know on which channel I can see the value you describe?
-
- Posts: 31
- Joined: 25 Aug 2022 00:16
Re: need Support for 1K8920885
On SW 11xx report old values doesn't work. On 10xx IS ok
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
If that's the case as you say, what other option do I have? There has to be something to adjust things. I guess I won't be the first to notice this and look for a solution. Otherwise I would have tried it like that
"skodapilot" writes, I mean it can't do more than nothing...... laugh
"skodapilot" writes, I mean it can't do more than nothing...... laugh
Last edited by Ferry on 16 Jan 2024 10:33, edited 1 time in total.
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: need Support for 1K8920885
Via vcds it should be named like k_zahl or so, if it is availableFerry wrote:Do you know on which channel I can see the value you describe?
Tapatalk
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
I'm now trying to adopt this from the original EOS speedometer and then see what works or not. and then with vcds look at which channel I find the value. By measured value blocks I think you mean?
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: need Support for 1K8920885
Yes, you should see something like thisFerry wrote: By measured value blocks I think you mean?
Tapatalk
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
I just compared the original and the new speedometer using the measured value, both have a value of 21960. So the problem must lie somewhere else, right? I'm really a little at a loss.
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: need Support for 1K8920885
Wheel circumference type?
Tapatalk
Tapatalk
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
Sorry, my mistake, I did something wrong... the K value is not the same. I have 21960 on the original and 21072 on the new one. Now the question is, how do I get it changed?
The wheel circumference is the same for both in the eeprom, on 01958.
The wheel circumference is the same for both in the eeprom, on 01958.
-
- Posts: 12
- Joined: 01 Jan 2024 22:17
Re: need Support for 1K8920885
So, I got it changed so that the k number or the displacement impulse (as it is called in the old speedometer) is now 21960. I'll test it out straight away to see if it makes a difference and get back to you straight away.
Who is online
Users browsing this forum: No registered users and 1 guest