i have a modified 3D cluster to rocco facelift papers which almost based on Passat 2019 Cluster hardware
everything is working good except the temp warning and low fuel warning Leds , also the rear fog doesn't work when switched on
so basically i checked the dump and make sure that every thing is working good in temp gauge and fuel gauge with vdo editor
i want to know what mods i need to make with leds and resistors to have those 3 LEDs work perfect
i found someone on forums has the same problem in the pic attached that could describe mine
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
Scirocco facelift gauges Led Reassign
-
mohamedaos
- Posts: 3
- Joined: 29 Mar 2023 15:55
Scirocco facelift gauges Led Reassign
You do not have the required permissions to view the files attached to this post.
-
skodapilot
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: Scirocco facelift gauges Led Reassign
Try to change led layout
Who is online
Users browsing this forum: No registered users and 9 guests