Unlock coding of Wheel Diameter and Fuel Tank in SW 11XX

[djdvr]

Hey,

Been playing around with the Wheel Diameter and Fuel tank but I cannot get to unlock the coding for it from VCDS/VCP?

0x86 is set to FF and for SW 07XX it works but for 11XX it still does not allow coding it.

Cheers

[Boubou]

Hello,

What wheel diameter are you looking for?

[djdvr]

Hello,

What wheel diameter are you looking for?

mk5/mk6 normal wheel but I want to be able to code it , I can change it in eeprom

[Boubou]

Hello,

What wheel diameter are you looking for?

mk5/mk6 normal wheel but I want to be able to code it , I can change it in eeprom

Not possible with soft coding.

Send me your dump.

I have mk5 with 3D cluster 11xx.

[djdvr]

Hello,

What wheel diameter are you looking for?

mk5/mk6 normal wheel but I want to be able to code it , I can change it in eeprom

Not possible with soft coding.

Send me your dump.

I have mk5 with 3D cluster 11xx.

got an E-Mail address ?

[Boubou]

[email protected]

You have mk5 ?

[djdvr]

[email protected]

You have mk5 ?

for a friend , I drive an A3 , mostly the same

[skodapilot]

Fuel sensors for SW11** will be fixed in next release .66 planed this week

Tapatalk

[Energy]

I also tried to change wheel diameter and/or scales....but the same. I have no error message in dash and no DTC, but immo (25) is not longer available on diagnosis session, so immo is active and car won´t start.
But I managed it to get the car running and was able to test the new settings, the speedometer changes were working.

I need to change the scales because on the rims are much bigger wheels and it shows to less speed now.


Tried it with 2K5920866C, H03, SW1104.