Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
Installation of the Tiguan counter for Multivan 3D
-
- Posts: 2
- Joined: 23 May 2020 12:59
Installation of the Tiguan counter for Multivan 3D
I put the 5N0920883E counter for VW Multivan. I have the problem of immobilizer information, e.g. in ABS. The direction indicator lamps do not work. The car starts normally. Does any of your colleagues have an idea or can you master it? In the ee connector from the meter
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: Installation of the Tiguan counter for Multivan 3D
I think that fastest way is using of 7N0 920 880 G dumps as reference
-
- Posts: 2
- Joined: 23 May 2020 12:59
Re: Installation of the Tiguan counter for Multivan 3D
I was thinking from a sharan. You could have a .sgo file (.frf, .odx) up to such a clock, try to flash
-
- Posts: 5
- Joined: 10 Feb 2016 23:20
Re: Installation of the Tiguan counter for Multivan 3D
Tiguan PQ 35 Multivan Polo Amarok PQ25 there is a problem with the swap eeprom turn signals will not help
-
- Posts: 85
- Joined: 23 Feb 2018 20:42
Re: Installation of the Tiguan counter for Multivan 3D
Eeprom swap with mileage section should help.
Could you send VCDS errors or full autoscan ?? on PM if here you cant
Could you send VCDS errors or full autoscan ?? on PM if here you cant
-
- Posts: 5
- Joined: 10 Feb 2016 23:20
Re: Installation of the Tiguan counter for Multivan 3D
Tiguan dashboard is PQ35 VW Multivan PQ 25 difference in BCM, swap eeprom does not help need to play flash
-
- Posts: 3
- Joined: 13 Sep 2019 22:01
Re: Installation of the Tiguan counter for Multivan 3D
I have played with this a bit
Even with pq25 nec and eeprom on pq35 board, functions dont work like indicators. Must be some other hardware difference on the pcb
Even with pq25 nec and eeprom on pq35 board, functions dont work like indicators. Must be some other hardware difference on the pcb
-
- Posts: 1
- Joined: 29 Mar 2023 23:37
Re: Installation of the Tiguan counter for Multivan 3D
Hello
Has anyone managed to solve this problem with the adaptation of the counter in T5?
Has anyone managed to solve this problem with the adaptation of the counter in T5?
Who is online
Users browsing this forum: Google [Bot] and 4 guests