hi, is it possible to change the logo?
i have a vw caddy you see and would like to add that to the main logo
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
startup logo
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: startup logo
You can change logo to any predefined according your cluster type (black and white or color), but you can not place your own
-
- Posts: 3
- Joined: 06 Oct 2019 14:46
startup logo
I was thinking that it would be nice to display in some way, if possible, the version number in the logo startup which appears when I start VREP.
What do you think?
What do you think?
-
- Posts: 20
- Joined: 09 Feb 2016 13:40
Re: startup logo
Using a custom startup logo is possible but you need to modify the firmware rather the the EEPROM.
https://www.drive2.ru/b/491290933422194886/
https://www.drive2.ru/b/491345359247769955/
https://www.drive2.ru/b/491290933422194886/
https://www.drive2.ru/b/491345359247769955/
-
- Posts: 35
- Joined: 09 Apr 2019 20:05
Re: startup logo
Did someone invest more time in this ?
The Russian post from Drive2.ru google-translated to german is probably loosing some of the information
i only could interpret that in Eeeprom Address 0x2F3 is a pointer into Flashaddress of Logo start.
I know that V850 is using 32 Bit addressing, so FlashAddr is 32 bit.
In my Eeprom Dump i get 00 D5 43 18 ==> 0x1843D500 but that is nonsense. The Flash is 2 Mbyte 0x00 - 0x1FFFFF
Best guess is 0x1843D5 that is inside the Flash and there is no code.
Any ideas ?
The Russian post from Drive2.ru google-translated to german is probably loosing some of the information
i only could interpret that in Eeeprom Address 0x2F3 is a pointer into Flashaddress of Logo start.
I know that V850 is using 32 Bit addressing, so FlashAddr is 32 bit.
In my Eeprom Dump i get 00 D5 43 18 ==> 0x1843D500 but that is nonsense. The Flash is 2 Mbyte 0x00 - 0x1FFFFF
Best guess is 0x1843D5 that is inside the Flash and there is no code.
Any ideas ?
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: startup logo
Oleg aka pirat did some steps. Unfortunately, I known only few results, because disassembler and assembler are not my powered skills.
Some weeks ago he sent me sprites of symbols from dashboard flash. As far as I know, he practically does not look the forum, so you can PM
Some weeks ago he sent me sprites of symbols from dashboard flash. As far as I know, he practically does not look the forum, so you can PM
You do not have the required permissions to view the files attached to this post.
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: startup logo
It seems, Oleg are continue working about cluster firmwares.
Today he sent me some additional screenshots with perefectly aligned sprites...
Today he sent me some additional screenshots with perefectly aligned sprites...
You do not have the required permissions to view the files attached to this post.
-
- Posts: 35
- Joined: 09 Apr 2019 20:05
Re: startup logo
Looks, good
You probably can give him a hint that he does have a PM, if he does not look into the Forum, than hey probably will see the PM not, too.
Thanks
You probably can give him a hint that he does have a PM, if he does not look into the Forum, than hey probably will see the PM not, too.
Thanks
-
- Site Admin
- Posts: 464
- Joined: 13 Jan 2014 06:18
Re: startup logo
Hm, I will notify him to check forum PM
Tapatalk
Tapatalk
Who is online
Users browsing this forum: No registered users and 0 guests