Hello,
switched from premium mfa to an 3d cluster.
Now the cruise control speed setting is not visible anymore.
also with vcds not visible.
any mods in ee i can do?
greets
Dear new users!
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
All messages from new users are moderated by administrator. Keep patience if You first message is not published, You will see it as soon as it will be accepted. Additional, new users have restriction in using of private message system.
5N0920883D cruise control
-
- Posts: 28
- Joined: 20 Feb 2017 23:58
Re: 5N0920883D cruise control
You will need to patch your ECU programming to enable High Can support.
Look this: https://skodapilot.com/2017/11/30/otobr ... dot-skoda/
Look this: https://skodapilot.com/2017/11/30/otobr ... dot-skoda/
-
- Posts: 15
- Joined: 06 Feb 2017 13:06
Re: 5N0920883D cruise control
Look in 2D9 address, with checked bit 7 adaptation channel should be enabled.
-
- Posts: 1
- Joined: 30 Jul 2019 02:34
5N0920883D cruise control
De cruise control moest ik bij mn 207 op 2 plekken activeren in PP, voordat ie het deed.
Volgens mij de engine ecu en in de BSI, als ik me goed herinner. Misschien heeft je garage op 1 plek gekeken?
Volgens mij de engine ecu en in de BSI, als ik me goed herinner. Misschien heeft je garage op 1 plek gekeken?
Who is online
Users browsing this forum: No registered users and 2 guests