Page 1 of 1

VW Transporter T6.1

Posted: 23 Jun 2020 18:01
by Cruiser89
Hello!

I have joined after downloading this awesome bit of software. I have a 2020 VW Transporter T6 and have changed from 17" Wheels to 19" Wheels. I hope you don't mind me starting a separate thread for some help.

The Part Number of my TPMS System is 5Q0907273D

Using the RDKSeditor I set up the following profiles:

Tyre Set #1
Original - 215/65/R16
Fully Loaded – FRONT: 3.5 – REAR: 3.6
Standard – FRONT: 3.3 – REAR: 2.9

Tyre Set #2
Name: Original - 205/65/R16
Fully Loaded – FRONT: 4.3 – REAR: 4.3
Standard – FRONT: 4.0 – REAR: 3.5

Tyre Set #3
Name: Original - 215/65/R17
Fully Loaded – FRONT: 4.0 – REAR: 4.0
Standard – FRONT: 3.9 – REAR: 3.3

Tyre Set #4
Name: Hankook - 255/45/R19 (104Y)
Fully Loaded – FRONT: 3.1 – REAR: 3.1
Standard – FRONT: 2.8 – REAR: 2.8

Now I have followed the procedure, created the XML file and using VCP I have then tried to upload as per the video I found on here.
https://www.youtube.com/watch?v=g7vaUkFZXV0

Image

Followed the procedure and the file wouldn't go across. I got the following error.

Error Writing Memory : 36 Operation RunCheckVWMemoryRoutineUDS 24 Request Sequence error.

Any help would be great.

Tim

Re: VW Transporter T6.1

Posted: 23 Jun 2020 18:06
by skodapilot
Did you check bit erase full memory in VCP?

Tapatalk


Re: VW Transporter T6.1

Posted: 24 Jun 2020 15:40
by Cruiser89
Yes I did check that box.

When you go into T6.1 it now has no profiles whatsoever.

So it has done something but it just hasn't loaded the new ones in.

Re: VW Transporter T6.1

Posted: 30 Jun 2020 10:30
by Cruiser89
Any further thoughts on what we could try to do to make this work correctly?

Re: VW Transporter T6.1

Posted: 30 Jun 2020 19:06
by skodapilot
No other ideas than check upload dataset using ODIS